“Geb” brand Toiturol, 900 gram pot.
– Plastic mastic for roof waterproofing;
– Repair of zinc roofs, fiber cement, gutters, gutters, glass roofs;
– Applicable on wet surfaces;
– Multi-support;
– Long duration.
FUNCTIONALITY:
Composition without bitumen pitch to ensure lasting waterproofing of roofs
despite climatic variations.
Toiturol has been specially designed for the repair of:
− zinc roofs, galvanized sheets, fiber cement, slates.
− gutters and gutters.
− glass roofs.
CHARACTERISTICS:
– Paste based on bituminous derivatives.
– Skin formation time: 1 to 2 hours.
– Temperature resistance up to +70°C.
– Does not fear frost.
– Very good resistance to water and UV.
– Excellent adhesion on all surfaces, even wet.
ADVICE FOR USE:
– Surfaces must be clean and degreased.
– Apply the product using a trowel, spatula or putty knife depending on the surface to be covered.
– For very deep crevices, garnish with tow or string then stuff with the product.
– In cold weather, it is possible to mix the product in a bain-marie to facilitate its application (never heat it over an open flame).
– Cleaning the tools: with gasoline F or acetone.
“Geb” brand Toiturol, 900 gram pot.
– Plastic mastic for roof waterproofing;
– Repair of zinc roofs, fiber cement, gutters, gutters, glass roofs;
– Applicable on wet surfaces;
– Multi-support;
– Long duration.
FUNCTIONALITY:
Composition without bitumen pitch to ensure lasting waterproofing of roofs
despite climatic variations.
Toiturol has been specially designed for the repair of:
− zinc roofs, galvanized sheets, fiber cement, slates.
− gutters and gutters.
− glass roofs.
CHARACTERISTICS:
– Paste based on bituminous derivatives.
– Skin formation time: 1 to 2 hours.
– Temperature resistance up to +70°C.
– Does not fear frost.
– Very good resistance to water and UV.
– Excellent adhesion on all surfaces, even wet.
ADVICE FOR USE:
– Surfaces must be clean and degreased.
– Apply the product using a trowel, spatula or putty knife depending on the surface to be covered.
– For very deep crevices, garnish with tow or string then stuff with the product.
– In cold weather, it is possible to mix the product in a bain-marie to facilitate its application (never heat it over an open flame).
– Cleaning the tools: with gasoline F or acetone.
Reviews
There are no reviews yet.